Autowatch Ghost Installation
Autowatch Ghost is a revolutionary immobiliser system that protects against key-cloning, hacking, and vehicle theft. It could lower your insurance costs and you may be eligible for incentives.
The Ghost immobiliser, which is discreet and easy to operate is built into the ECU of the vehicle. This means that it is impossible to start the engine without a secret PIN code.
TASSA Approved
If you want to protect your vehicle from being stolen by key cloning, then you will need to get the TASSA verified Autowatch Ghost immobiliser system. This is the latest in car security and deter thieves two ways - it can stop your car from starting if the keys are copied and stops you from driving away if thieves have stolen your existing key fobs.
The Ghost is the next generation and connects to the CAN data network of your vehicle. A unique PIN code can be entered by using the standard buttons on the dashboard, or on the steering wheel. The Ghost will stop the engine from beginning. It can be programmed with various settings, like Gear Change Blocking (vehicle-dependent), Stall on Start (vehicle-dependent) or Lock Gearbox. It is completely undetectable and doesn't make use of radio frequency signals, which means that it cannot be detected by RF scanners or a 'code grabber'.
The Ghost is a small, weatherproof device and is completely sealed to be hidden inside the vehicle or placed on the dashboard, where it is almost impossible for a thief to locate. In contrast to other alarm and immobiliser devices on the market, this isn't an Thatcham Category-approved product, but is recognized by insurance companies as an effective anti-theft system. It also comes with a 5 years warranty.
The TASSA procedure guarantees that any installation work on the Ghost is completed by a trained installer. This gives the insurer, the customer and police confidence in the quality of any installation that is completed. It also guarantees that the installers follow the product manufacturer's instructions and set up the product in a safe and correct manner. Installers who are members of TASSA have a clear commitment to excellence and making a real difference in the fight against crime.
Compatible with a wide range of vehicles
The Autowatch Ghost 2 immobiliser is an innovative device that shields your vehicle from key cloning. Its PIN code system has been integrated into the ECU of your car which makes it much more difficult for thieves to clone the keys or hack the system of your vehicle. It is also discrete and can easily be installed in various vehicles including minivans as well as sports automobiles. It's also weatherproof and small enough to keep out of sight. This makes it harder for thieves.
The process of installing the Ghost is easy and doesn't require any additional wiring. It is compatible with a range of vehicles and relies on the CAN data network of the vehicle to communicate. It is also able to be deactivated or turned off from the main screen of the vehicle. The device is compatible with many mobile apps that permit you to manage the security of your vehicle remotely.
Despite its many advantages, the Ghost has some issues that can be encountered after installation. These problems can be caused by many factors like defective wiring or an incompatible mobile application. In these situations, contacting an expert installer is the best way to solve the issue.
Users also experience difficulty in completing the sequence to disarm the Ghost. This is usually due users forgetting or not practising the proper sequence. However, the device's manual provides an emergency code that can be used in the case of these issues.
Discreet
Autowatch Ghost is an advanced and discrete security system that safeguards against vehicle theft. It uses the CAN data network of your vehicle to work and is completely invisible to thieves, which makes it a highly effective deterrent. It also has the ability to be triggered by other security systems, like car alarms, and provides real-time alerts to the owner. These features can help police in finding your vehicle if it is stolen.
The system can be set up in just a few minutes and is compatible with the majority of cars. It's an aftermarket device TASSA-approved that is compatible with vehicle trackers and is even recognized by a number of insurance companies. It's also tamperproof and silent, meaning that criminals will be unable to hear the operation. The Ghost immobiliser can also be programmed to require a PIN that is up to twenty digits. This makes it virtually impossible to determine the PIN.
Ghost can only be used only in the Service/Valet Mode. This will prevent you from giving your PIN code to someone who requires access to the computer system of your vehicle, such as a mechanic. The Ghost comes with five-year guarantee.
The Autowatch Ghost immobiliser is a revolutionary security system that stops key cloning, ECU hacking and car theft. It's an aftermarket CAN bus device that's a great choice for both new and old vehicles. It's simple to install and operates quietly, which means it can be fitted in any vehicle without cutting wires. It also allows you to change your pin number quickly and only you will are aware of it. The system doesn't also use codes-grabbing or RF scanning technology that means it's virtually inaccessible.
Easy to use
Autowatch Ghost is an innovative and efficient security system that was designed to stop vehicle theft by shutting off the engine. It works by using a code that is personalised by the vehicle owner. This code must be entered to allow the car to begin. This cutting-edge technology enhances the overall security of your vehicle and makes it a top choice for many drivers. However, executing this installation process requires meticulous preparation and focus on the details. This includes checking compatibility and relying on the expertise of experts, adhering legal regulations, and understanding the Ghost II's operational complexities. Prioritising these factors will ensure a successful installation, and optimum functionality.
The Ghost II is a silent system that is not spotted by thieves. It is also tiny and weatherproof, making it hard to gain access. It is compatible with CAN Lenastark, CAN, as well as other vehicles. It can also be used in vehicles that require isolation of the battery to ensure maintenance. installing ghost immobiliser has a Transport Mode which disables the device when your car is being rented or loaned.
To use the Ghost 2, you must have a personal PIN to enter before starting the vehicle. Installers will create the default code, but it is advised to change it as soon as possible to ensure your security. The device can go into sleep mode to save the battery, however when it detects any signal from the engine management system it will wake up and prevent the vehicle from starting. This feature can be disabled by going to the Settings menu. It is best to use the Ghost immobiliser only when your vehicle is moving and to lock it when you leave it unattended.
Easy to install
The Autowatch Ghost II is an advanced security system that thwarts car theft by shutting down the engine of the vehicle. It operates by using a number that is unique to the owner of the vehicle, which makes it a powerful deterrent. Installing this device requires careful attention to detail and careful preparation. By ensuring compatibility, relying upon experts and adhering to the legal requirements and fully understanding the system's workings, you can make sure that the installation process is smooth and derive the maximum benefit from this security device.
This unique CANbus immobiliser from Autowatch is simple to install, and works quietly, so that criminals can't hear it operating. It uses the CAN bus to communicate with your vehicle and is compatible with a large variety of vehicles. It is a revolution in the field of vehicle security. It also shields your vehicle from key cloning, hacking and car theft, since it won't start unless you have the correct pin code. It is small and weatherproof, making it difficult for criminals to alter or locate.
You'll need to locate the CAN High (CAN H) and the CAN Low (CAN L) Wires on the wiring diagram of your vehicle before you can begin installing the Ghost Immobiliser. Connect the CAN high and CAN low wires to the ECU. The wires are located under the dashboard, or close to the engine.
It is best to choose an installer who is certified and reputable for the installation of the Ghost immobiliser. This way, you will be certain that the system has been installed correctly and will not interfere with the functionality of your vehicle. Additionally, the installer will be able advise you on how to use your new device efficiently.